Safety
Read and retain these instructions before connecting ASP510 to AC power.
To reduce the risk of fire or electrical shock, do not expose ASP510 to rain or moisture.
Refer servicing to qualified service personnel.
Protective earth
The rack processor is connected to mains safety earth through its power cord.
Never operate ASP510 with the protective-earth connection removed.
Before applying power
Confirm that:
- the rear-panel voltage selector is set for the local AC supply
- the fitted fuse matches the selected voltage range
- the mains cable and plug are undamaged
- the ventilation openings are unobstructed
Mains ranges
- 230 V selector position: 210 V to 250 V AC
- 115 V selector position: 105 V to 125 V AC
For 100 V operation, contact Audient Support or an authorised dealer.
Fuse ratings
- 230 V setting: 20 mm T250 mA
- 115 V setting: 20 mm T500 mA
Always replace a fuse with the same type and rating.
If a fuse fails, check the mains voltage setting, mains cable and supply before replacing it. If the replacement fuse fails, disconnect the unit and contact qualified service personnel.
Ventilation
The Surround Processor is fan cooled.
Do not block the ventilation openings and ensure there is adequate airflow around the rack unit.
Servicing
There are no user-serviceable parts inside ASP510.
Do not open or modify the unit. Internal servicing should be carried out only by qualified service personnel.
Next steps
Continue to Warranty and Service.