Skip to main content

Safety and Compliance

Read and keep these instructions before connecting the power cable and powering iD48.

iD48 uses an internal switch-mode power supply that operates from 90–264 V AC, 50–60 Hz, so no manual operating-voltage adjustment is required.

warning

There are no user-serviceable parts inside iD48. Refer servicing to qualified service personnel. Do not tamper with the internal power supply or mains voltages. To reduce the risk of fire or electric shock, do not expose the unit to rain or moisture.

Important safety instructions​

  1. Read these instructions.
  2. Keep these instructions.
  3. Heed all warnings.
  4. Follow all instructions.
  5. Do not use this equipment near water.
  6. Clean only with a dry cloth.
  7. Do not install near heat sources such as radiators, heat registers, stoves or other equipment, including amplifiers, that produce heat.
  8. Do not defeat the safety purpose of the polarised or grounding-type plug. If the supplied plug does not fit the outlet, consult a qualified electrician.
  9. Protect the power cord from being walked on or pinched, particularly at plugs, convenience receptacles and the point where it exits the equipment.
  10. Only use attachments/accessories specified by the manufacturer.
  11. Unplug this equipment during lightning storms or when unused for long periods of time.
  12. Refer servicing to qualified service personnel whenever the equipment has been damaged, including damage to the power cord or plug, liquid/object ingress, exposure to rain or moisture, abnormal operation or a drop/impact.
  13. As a mains-powered device, iD48 must not be exposed to dripping or splashing and objects filled with liquid must not be placed on the equipment.

Declaration of Conformities​

FCC Part 15B​

iD48 is declared compliant with FCC Part 15B.

The equipment generates, uses and can radiate radio-frequency energy. If it causes harmful interference to radio or television reception, try one or more of the following:

  1. Re-orient or relocate the receiving antenna.
  2. Increase the separation between iD48 and the receiver.
  3. Connect the receiving equipment to an outlet on a different circuit.
  4. Consult the dealer or an experienced radio/TV technician.

Declarant: Audient Ltd, Aspect House, Herriard, Hampshire, RG25 2PN, United Kingdom. Tel: +44 (0) 1256 381944.

Audient Ltd declares under its sole responsibility that iD48 complies with Part 15 of the FCC Rules. Operation is subject to these two conditions:

  1. This device may not cause harmful interference.
  2. This device must accept any interference received, including interference that may cause undesired operation.

CE and UKCA​

Audient Ltd declares that iD48 is in material conformity with the appropriate CE and UKCA standards and directives for an audio product designed for consumer use.

RoHS​

For RoHS, Directive 2011/65/EU is the applicable European Union legislation. EN IEC 63000:2018 is the supporting technical-documentation standard; it is not itself a Directive.

The declaration also references the following California RoHS-related provisions:

  • California Health and Safety Code sections 25214.10, 25214.10.2 and 58012.
  • California Public Resources Code section 42475.2.

Continue to Installation and Firmware.