मुख्य कंटेंट तक स्किप करें

तकनीकी स्पेसिफिकेशन

नीचे दिए गए values ASP8024-HE के लिए specified हैं।

कंसोल ऑडियो स्पेसिफिकेशन​

Frequency response​

Signal pathस्पेसिफिकेशन
Mic input to Mix output±0.3 dB, 20 Hz to 20 kHz, with 6 to 40 dB gain
Line input to Mix output±0.3 dB, 20 Hz to 20 kHz, with 0 dB gain

Noise​

मापस्पेसिफिकेशन
Mic EIN, 20 Hz–20 kHz, 150 Ω सोर्स< −127.5 dBu
Bus noise, no inputs routed< −93 dBu
Bus noise, 36 inputs routed, 990C Mix Amps< −81 dBu

Mic CMRR​

Gain settingस्पेसिफिकेशन
Minimum gain70 dB
Maximum gain75 dB

Crosstalk और mute attenuation at 1 kHz​

Functionस्पेसिफिकेशन
Short Fader mute> 90 dB
Long Fader mute> 90 dB
Mix assign> 90 dB
Bus assign> 90 dB

Maximum इनपुट लेवल​

Inputस्पेसिफिकेशन
Mic, minimum gain> +21 dBu
Line, minimum gain> +30 dBu
Insert return> +21 dBu

Maximum आउटपुट into 2 kΩ​

Outputस्पेसिफिकेशन
Mix output> +26 dBu
Bus output> +26 dBu
Aux output> +26 dBu
Insert send> +20 dBu
Monitor, Studio and Foldback outputs> +20 dBu

THD और noise at +22 dB आउटपुट​

Signal path1 kHz पर स्पेसिफिकेशन
Mic XLR input to any output< 0.005%
Line input to any output< 0.005%
Tape input to any output< 0.003%

Retro Iron Heritage आउटपुट stage​

Heritage Card EQ stages में LM4562 amplifiers और Carnhill transformers को फ़ीड करने वाला discrete Class-AB Retro Iron आउटपुट stage उपयोग करता है।

THD और noise​

Test conditionस्पेसिफिकेशन
0 dBu into 600 Ω< 0.016% at 1 kHz, 2nd and 3rd harmonics
+24 dBu into 600 Ω< 0.003% at 1 kHz

Noise, tone shaping और frequency response​

Parameterस्पेसिफिकेशन
Retro Iron on, EQ off< −92 dBu, 20 Hz–20 kHz unweighted
Low Bump+2 dB wide bell at 60 Hz, Baxandall type
High Lift+2 dB wide bell at 20 kHz, Baxandall type
Gain-adjust jumper positions+0.5, +1, +2 dB डिफ़ॉल्ट, or +3 dB
Retro Iron engaged on Main Mix±0.1 dB, 10 Hz to 80 kHz
Hard-wire bypassRelay switched, no loading effects

आउटपुट stage​

Parameterस्पेसिफिकेशन
Carnhill line driver maximum output+28 dBu into 600 Ω
Insertion loss1 dB into 600 Ω, transformer loading
Output gain±0.5 dB, load dependent
Output impedance600 Ω
Dynamic range120 dB
Crosstalk< −82 dB, 10 Hz–10 kHz; typically −88 dB at 1 kHz

Reference headphone amplifier​

हेडफ़ोन amplifier ALT 3 मॉनिटर destination है और Burr-Brown तथा LM4562 amplifiers पर आधारित हाई-करंट आउटपुट stage उपयोग करता है।

Frequency response और noise​

Parameterस्पेसिफिकेशन
Frequency response±0.1 dB, 20 Hz–20 kHz, load independent
Reference headphone-stage noise< −104 dBu, 20 Hz–20 kHz unweighted
Dynamic range> 122 dB
Crosstalk< −80 dB, 10 Hz–10 kHz; typically −82 dB at 1 kHz
Output impedance< 10 Ω, DC coupled
Maximum output level+22 dBu, typically +18 dBu into headphones, load dependent

THD at 1 kHz​

Load0 dBuHigher-level test
600 Ω0.0013%0.0009% at +18 dBu
150 Ω0.0010%0.0012% at +18 dBu
60 Ω0.0024%0.0016% at +18 dBu
32 Ω0.0040%0.0077% at +17 dBu

Maximum आउटपुट पावर​

LoadMaximum output power
600 Ω+22 dBu @ 0.0010% THD = 317 mW
150 Ω+21 dBu @ 0.0012% THD = 1 W
60 Ω+20 dBu @ 0.0080% THD = 2 W
32 Ω+17 dBu @ 0.0080% THD = 2 W

आगे शब्दावली पर जाएँ।